Monday, February 28, 2011

Production and Operations Management - 9

Production and Operations Management - 9


True/False
Question
Process Sheets for parts in batch production are not maintained as standard process sheet
Correct Answer
False


True/False
Question
Theoretical capacity equals number of normal working hours of that machine.
Correct Answer
True


Multiple Choice Multiple Answer
Question
Which are the basic requirements of the " Quality of Design "?
Correct Answer
Identification of right product , Selection of appropriate features , Ensure that product renders satisfactory service to customer


Match The Following
Question
Correct Answer

Change in chemical characteristic
Chemical reaction

Consumption of effort
Posting a ledger

Information given
Giving directions or instructions

Subtraction
Removal of worn-out part from a machine


Multiple Choice Multiple Answer
Question
Which of the following aspects are essential to ensure quality of purchased items?
Correct Answer
Defining right quality for the job , Vendor performance evaluation , Making sure that suppliers understand the requirements


Select The Blank
Question
The ________ is necessary when the job requires detailed of one or more of the job characteristics with the help of special equipment which is not available at the producing company.
Correct Answer
Inspection order



Select The Blank
Question
The term ________ emplies the foregone profit due to inability of company to produce.
Correct Answer
Opportunity cost


Multiple Choice Multiple Answer
Question
Which of the following factors play important role while selecting or rejecting a particular site from legislation and taxation point of view?
Correct Answer
Labour laws , Building codes , Policies regarding issue of licences



True/False
Question
Skill of labour force in a product type layout is usually higher than in the process type of layout
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer
Question
What is the base for considering activity time as single time estimate or three time estimate?
Correct Answer
Level of uncertainty
Your Answer
Level of uncertainty

Multiple Choice Single Answer
Question
Product layout is employed for manufacturing following products
Correct Answer
refrigirators
Your Answer
automobile components

True/False
Question
Diversified labour is adequately available in rural area as compared to urban area.
Correct Answer
False
Your Answer
False

Match The Following
Question
Correct Answer
Your Answer
Fixation of inventory level
Reorder level
Single source of supply
Symptom of ill planned purchasing
Over ordering
Over ordering
Factor influencing material planning
Lead time
Reorder level
Net requirement of material under MRP
Stock on hand
Stock on hand

True/False
Question
In case of backward pass computation, the latest event time of the end event equals to the earliest event time minus duration of that activity.
Correct Answer
False
Your Answer
True

Select The Blank
Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Single Answer
Question
Which of the following technique makes three time estimates for each activity?
Correct Answer
Project Evaluation & Review Technique
Your Answer
Project Evaluation & Review Technique

True/False
Question
Suburban location provides the compromise netween rural and urban locations.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer
Question
Which time is determined by the backward pass computation method of determination of critical path ?
Correct Answer
Latest allowable time for each event
Your Answer
Latest allowable time for each event

Multiple Choice Single Answer
Question
What do you understand by the measurement of work to establish allowed time for a job for the defined method?
Correct Answer
Work measurement
Your Answer
Motion economy

True/False
Question
Even in a small set up wherein maintenance of a machine is looked after by a mechanic cum worker, he should report directly to the person responsible for the manufacturing operations.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer
Question
Out of two basic criteria for the selection of a manufacturing method, one is, it must be able to meet the specifications of final product and the other is, it must be
Correct Answer
Cost effective method
Your Answer
Cost effective method

True/False
Question
Kanban system is essentially a computer based system for production scheduling and control
Correct Answer
False
Your Answer
True

Multiple Choice Multiple Answer
Question
Which of the following symbols are used in flow process chart but not used in operation process chart?
Correct Answer
Storage , Delay , Transport
Your Answer
Storage , Delay

Multiple Choice Single Answer
Question
In case of Batch Production which kind of labour is expected?
Correct Answer
Skilled in one specific Manufacturing Process
Your Answer
Skilled in one specific Manufacturing Process

Multiple Choice Multiple Answer
Question
Which of the following are the major steps of making of the X bar-R control chart?
Correct Answer
Collection of data , Claculation of mean,range,grand average and mean range , Set up control chart for average and calculate control limits of range chart
Your Answer
Claculation of mean,range,grand average and mean range , Set up control chart for average and calculate control limits of range chart , Calculate the coefficient of deviation

True/False
Question
For p-chart, p bar is the ratio of total number of units inspected to the total number of units defectives.
Correct Answer
False
Your Answer
True

Multiple Choice Single Answer
Question
Which of the following is the most popular technique for Project Production?
Correct Answer
PERT & CPM
Your Answer
Break Even Analysis

Multiple Choice Single Answer
Question
Which kind of preventive inspection detects some maintenance related characteristics by making use of human senses, when equipment is in operation?
Correct Answer
Extrernal inspection
Your Answer
Internal inspection

Multiple Choice Single Answer
Question
Process Engineer does not get sufficient time for designing tooling for most economic production run when
Correct Answer
Delivery time is less
Your Answer
Delivery time is less

Multiple Choice Single Answer
Question
How dummy activities are shown in the time chart during project scheduling?
Correct Answer
Vertical lines
Your Answer
Dotted lines

True/False
Question
The control chart for number of defectives is more convenient to make than control chart for fraction defectives sincethe fugure of number of defectives units can be directly taken from the inspection report.
Correct Answer
True
Your Answer
True

Multiple Choice Multiple Answer
Question
Which are the advantages of suburban location?
Correct Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be available , Plant expansion is easier due to less or no restriction for building and construction
Your Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be available , Availability of excellent transportation and communication facilities

Multiple Choice Multiple Answer
Question
Which utilities are considered as infrastructural requirements?
Correct Answer
Disposal of waste , Power , Water
Your Answer
Power , Labour , Water

Multiple Choice Single Answer
Question
What do you understand by the timeframe for the maintenance needs of the equipment?
Correct Answer
Maintenance inspection schedule
Your Answer
Maintenance inspection schedule

Multiple Choice Multiple Answer
Question
Which of the following are assignable cause?
Correct Answer
Large varaitions in hardness of material , Tool wear , Errors in setting
Your Answer
Large varaitions in hardness of material , Tool wear , Errors in setting

Multiple Choice Single Answer
Question
Which of the following policies is advisable in case of low product variety and large volumes?
Correct Answer
Low Skilled Labour & Special Purpose Machines
Your Answer
Low Skilled Labour & Special Purpose Machines

Multiple Choice Single Answer
Question
Which phase of method study is concerned with analyzing the facts critically, generating alternatives which form the basis for selection and development of improved methods?
Correct Answer
Critical examination
Your Answer
Critical examination

Select The Blank
Question
A ________ is another form of subcontracting.
Correct Answer
Hiring capacity
Your Answer
Collaboration

Select The Blank
Question
The ________ must ensure that the product satisfy the functional requirements of it's usage.
Correct Answer
Quality of design
Your Answer
Quality of conformance

Multiple Choice Multiple Answer
Question
Gross requirement of finished product is determined on the basis of following
Correct Answer
Forecasted sales , Pending sales order , Management decision to stock
Your Answer
Pending sales order , Management decision to stock , Gross Market requirement

Select The Blank
Question
The ________ includes preventive maintenance activities whose needs are identified through inspection which requires stoppage of machines.
Correct Answer
Shutdown Maintenance
Your Answer
Working Maintenance

Select The Blank
Question
A set of activities to keep an equipment in the specified condition is called as ________.
Correct Answer
Maintenance
Your Answer
Maintenance

Multiple Choice Single Answer
Question
Which kind of labour force is required in case of Jobbing Production?
Correct Answer
Highly Skilled
Your Answer
Highly Skilled

Select The Blank
Question
One detachable ticket is prepared for each ________.
Correct Answer
Operation
Your Answer
Operation

Select The Blank
Question
The ________ is the watch dog which ensures that every element of production and activities which could affect the quality of end product are regulated to the extent desirable.
Correct Answer
Quality control
Your Answer
Quality control

Select The Blank
Question
The ________ is the maximum percentage defective that for the purpose of sampling inspection can be considered satisfactory as a process average.
Correct Answer
Acceptable quality level
Your Answer
Lot Tolerance Percentage Defective

Multiple Choice Multiple Answer
Question
Which of the following products should be produced by using mass production?
Correct Answer
Refrigerator , Tyre for automobile , Television Set
Your Answer
Refrigerator , Tyre for automobile , Television Set

Production and Operations Management - 8
LIST OF ATTEMPTED QUESTIONS AND ANSWERS

Multiple Choice Multiple Answer
Question
Which of the following concepts must be understood for the achievement of quality?
Correct Answer
Quality of design , Quality of conformance , Purpose of product
Your Answer
Quality of conformance , Quality of design

Multiple Choice Single Answer
Question
What do you mean by the graphical representation of the project which is composed as series of connected arrows and circles to describe the interrelationship of the activities involved?
Correct Answer
Network
Your Answer
Network

Multiple Choice Multiple Answer
Question
Which of the following cases indicates change in physical characteristic?
Correct Answer
Turning , Grinding , Drilling
Your Answer
Turning , Grinding , Drilling

Multiple Choice Single Answer
Question
What do you mean by the verification of object against predetermined standards of quality or quantity or both?
Correct Answer
Inspection
Your Answer
Quality assurance

Multiple Choice Single Answer
Question
Any premise in which persons are employed for purpose of making any product/s is called
Correct Answer
Factory
Your Answer
Factory

Select The Blank
Question
The ________ advocates maintenance procedures whereby the condition of the plant is constantly watched through systematic inspection to unearth unhealthy conditions and preventive
Correct Answer
Preventive Maintenance
Your Answer
Preventive Maintenance

Select The Blank
Question
The ________ is the defect level for which lots are regarded as bad lots.
Correct Answer
Lot Tolerance Percentage Defective
Your Answer
Lot Tolerance Percentage Defective

Multiple Choice Single Answer
Question
How non-critical activities are shown in the time chart during project scheduling?
Correct Answer
Thin lines
Your Answer
Thin lines

Select The Blank
Question
An ________ history card is the record of all repairs, replacements and engineering changes carried out in the equipment during it's period of service.
Correct Answer
Equipment history card
Your Answer
Equipment history card

Multiple Choice Single Answer
Question
Who prepares the daily production report?
Correct Answer
Shop Supervisor
Your Answer
Shop Supervisor

Select The Blank
Question
Work study is also called ________ study
Correct Answer
Time and Motion
Your Answer
Motion

True/False
Question
Every network does not necessarily have a critical path.
Correct Answer
False
Your Answer
False

Select The Blank
Question
Production Planning is a centralised activity which includes functions such as ________
Correct Answer
Scheduling
Your Answer
Scheduling

Multiple Choice Single Answer
Question
Which method of critical path determination begins with the end event and moves backward to the start event of the project network?
Correct Answer
Backward pass computation
Your Answer
Backward pass computation

True/False
Question
Scrap allowance is added to net requirement of material while ordering for material
Correct Answer
True
Your Answer
True

True/False
Question
Dust gets mixed with lubricants, forms an abrasive substance and causes pre-mature failure of machinery.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer
Question
A good plant layout helps in
Correct Answer
Reducing handling costs
Your Answer
Reducing handling costs

True/False
Question
It would not affect the project completion time if non-critical activities take little loner time than planned.
Correct Answer
True
Your Answer
True

Select The Blank
Question
The ________ is the process of withdrawing the equipment from the production line, dismantling it unitwise, visualising defects, effecting adjustments, replacing worn-out parts and finally building it up to get desired accuracies.
Correct Answer
Reconditioning
Your Answer
Reconditioning

True/False
Question
Flow process charts do record movements as well as visual pictures.
Correct Answer
False
Your Answer
False

True/False
Question
Process Planning is concerned with decisions regarding requirement of machines and manpower for meeting customer demand
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer
Question
What is the meaning of " Product features" according to J.M.Juran?
Correct Answer
Quality of design
Your Answer
Quality of design

Multiple Choice Single Answer
Question
Technique which can help an organization to reduce inventory is called
Correct Answer
MRP
Your Answer
MRP

Multiple Choice Multiple Answer
Question
Which of the following are examples of consumption of physical effort during recording for method study?
Correct Answer
Bending , Positioning , Unloading
Your Answer
Bending , Positioning , Drilling

True/False
Question
Objective of Work Study is to improve Productivity
Correct Answer
True
Your Answer
True

Multiple Choice Multiple Answer
Question
Which three of the following options can be used to reduce the duration of activity during project crashing?
Correct Answer
Allocating more manpower and machines than originally planned for. , Working additional shifts or overtime. , Awarding work to vendors who charge extra but expedite deliveries.
Your Answer
Allocating more manpower and machines than originally planned for. , Working additional shifts or overtime. , Awarding work to vendors who charge extra but expedite deliveries.

Multiple Choice Single Answer
Question
Which is the next stage to the inspection based quality control in the historical development of quality management.
Correct Answer
Quality assurance
Your Answer
Quality assurance

Match The Following
Question
Correct Answer
Your Answer
Bottom compartment of control board
Bunch of work orders arranged in a sequence in which they are to be processed.
Bunch of work orders arranged in a sequence in which they are to be processed.
Control board
Pictorial view of machine loading activity
Pictorial view of machine loading activity
Top compartment of control board
Work order of item currently being worked on the machine
Work order of item currently being worked on the machine
Middle compartment of control board
Work order of item to be processed next on the machine
Work order of item to be processed next on the machine

Select The Blank
Question
The ________ is the maintenance work initiated on a result of knowledge of the condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Condition monitoring

Select The Blank
Question
The easiest way to bring the delayed job within the promised delivery time by using extra shift or weekly holiday is ________.
Correct Answer
Overtime working
Your Answer
Overtime working

Multiple Choice Multiple Answer
Question
Following are some of the Principles of Management advocated by F W Taylor
Correct Answer
Selection of best worker for each particular task , Division of work between worker and management , Training and development of the workmen
Your Answer
Selection of best worker for each particular task , Division of work between worker and management , Training and development of the workmen

Multiple Choice Multiple Answer
Question
How the concept of float is helpful to planners?
Correct Answer
To decide priorities in allocation of resources , To minimize the requirement of resources , To prevent peaks and valleys in requirement of resources
Your Answer
To decide priorities in allocation of resources , To minimize the requirement of resources

Multiple Choice Single Answer
Question
The process of changing inputs into outputs thereby adding some value to entity can be defined as
Correct Answer
Operation
Your Answer
Operation

Multiple Choice Single Answer
Question
Which kind of defect can be called as minor defect?
Correct Answer
Which does not reduce the usability of the product for its intended use
Your Answer
Which does not reduce the usability of the product for its intended use

Select The Blank
Question
The ________ is specified to indicate the maximum permissible variability in the dimensions product or parts.
Correct Answer
Tolerance
Your Answer
Tolerance

True/False
Question
Sampling inspection is best suited when cost of inspection is much higher than the loss arising from the acceptance of a defective part.
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer
Question
Which element of a network represents a task which has got a definite beginning and definite end?
Correct Answer
Activity
Your Answer
Activity

Multiple Choice Multiple Answer
Question
Following are the commonly used factors considered for evaluation of layout in factor analysis method
Correct Answer
Flow of material , Equipment utilization , Working condition
Your Answer
Flow of material , Equipment utilization , Working condition

Select The Blank
Question
A good maintenance system is not a luxary but a ________.
Correct Answer
Necessity
Your Answer
Necessity

Select The Blank
Question
The ________ are the definitions of the measurable as well as nonmeasurable characteristics of the product.
Correct Answer
Specifications
Your Answer
Standards

Multiple Choice Multiple Answer
Question
Which features should be covered by the specifications of materials while defining the qualitative requirement?
Correct Answer
Material composition , Dimensions , Any heat treatment if required
Your Answer
Material composition , Dimensions , Any heat treatment if required

Multiple Choice Single Answer
Question
The ratio of output to input of a production system is commonly known as
Correct Answer
Productivity
Your Answer
Productivity

True/False
Question
F W Taylor devised a system for classifying motions into basic divisions called Therbligs
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer
Question
Which portion of the perforated route sheet should be signed by the operator or supervisor?
Correct Answer
Lower portion
Your Answer
Lower portion

True/False
Question
In case of X bar, if the process is not under control indicated by some points falling outside the control limits, such points outside the control limits are eliminated and new trial control limits for the remaining points are computed.
Correct Answer
True
Your Answer
True

Match The Following
Question
Correct Answer
Your Answer
Scale model
Layout analysis
Modelling approach to layouts
Factor Analysis
Method to evaluate layouts
Technique for evolving and analysis of layouts
Minimization of production delays
Objective of good layout
Objective of good layout
Maximum visibility
Principles of good layout
Principles of good layout

True/False
Question
Maintenance function must be decentralised apart from a size of a manufacturing organisation for it's better functioning.
Correct Answer
False
Your Answer
True
Tuesday, August 19, 2008
Production and Operations Management - 7

Select The Blank
Question
The ________ must ensure that the product satisfy the functional requirements of it's usage.
Correct Answer
Quality of design
Your Answer
Quality of design

Multiple Choice Multiple Answer
Question
Which of the following information is available in summary of part in a chart during methods study?
Correct Answer
Frequency of each symbol , Total time for each symbol , Total distance travelled by the object
Your Answer
Frequency of each symbol , Total time for each symbol

True/False
Question
The event numbers as far as possible reflect the logical relationships of the activities.
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer
Question
Which varaible is taken along the ordinate or Y axis?
Correct Answer
Quality
Your Answer
Quality

Multiple Choice Multiple Answer
Question
Which of the following schedules are recommended to prepare and follow as a part of preventive maintenance system?
Correct Answer
Preventive inspection schedule , Cleaning and upkeep schedule , Lubrication schedule
Your Answer
Preventive inspection schedule , Cleaning and upkeep schedule , Lubrication schedule

Multiple Choice Single Answer
Question
Which kind of preventive inspection detects some maintenance related characteristics by making use of human senses, when equipment is in operation?
Correct Answer
Extrernal inspection
Your Answer
Extrernal inspection

Multiple Choice Multiple Answer
Question
Which are different ways to show critical path in a network?
Correct Answer
Thick Line , Red Line , Double Line
Your Answer
Thick Line , Red Line , Double Line

Multiple Choice Multiple Answer
Question
What are the benefits of overhauling?
Correct Answer
It increases useful life of an equipment and it's parts , Advance planning allows to attend equipment without disturbing the production programme , Advance planning allows to prepare and keep ready the list of replacement spares
Your Answer
It increases useful life of an equipment and it's parts , Advance planning allows to attend equipment without disturbing the production programme , Advance planning allows to prepare and keep ready the list of replacement spares

Match The Following
Question
Correct Answer
Your Answer
Combined Layout
Mixed Layout
Mixed Layout
Fixed Position Layout
Project Layout
Line Layout
Product Layout
Line Layout
Shop layout
Process Layout
Functional Layout
Functional Layout

Multiple Choice Multiple Answer
Question
Which of the following factors play important role while selecting or rejecting a particular site from legislation and taxation point of view?
Correct Answer
Labour laws , Building codes , Policies regarding issue of licences
Your Answer
Labour laws , Building codes , Policies regarding issue of licences

Select The Blank
Question
The ________ is the maximum percentage defective that for the purpose of sampling inspection can be considered satisfactory as a process average.
Correct Answer
Acceptable quality level
Your Answer
Acceptable quality level

Multiple Choice Multiple Answer
Question
Major contributors in the development of Control Charts, Sampling plan are
Correct Answer
F H Dodge , H G Roming , Walter Schewhart
Your Answer
F H Dodge , H G Roming , Walter Schewhart

True/False
Question
Skill of labour force in a product type layout is usually higher than in the process type of layout
Correct Answer
False
Your Answer
True

True/False
Question
Repetitive movements between work stations which are difficult to be traced on string diagrams can be conveniently shown on flow diagrams.
Correct Answer
False
Your Answer
True

Select The Blank
Question
The ________ is necessary when the job requires detailed of one or more of the job characteristics with the help of special equipment which is not available at the producing company.
Correct Answer
Inspection order
Your Answer
Job card

Multiple Choice Multiple Answer
Question
Which of the following cases can be referred as operation in method study recording?
Correct Answer
Change in physical characteristic , Consumption of physical effort , Change in chemical characteristic
Your Answer
Change in physical characteristic , Consumption of physical effort , Change in chemical characteristic

Select The Blank
Question
The ________ is the maintenance work initiated on a result of knowledge of the condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Overhauling

True/False
Question
All activities lying on the non-critical paths must have total float and free float.
Correct Answer
False
Your Answer
False

Select The Blank
Question
Work study is also called ________ study
Correct Answer
Time and Motion
Your Answer
Method

Match The Following
Question
Correct Answer
Your Answer
Crash cost of an activity
Cc
Cc
Normal time of an activity
Tn
Tn
Crash time of activity
Tc
Tc
Normal cost of an activity
Cn
Cn

Multiple Choice Multiple Answer
Question
Which are the advantages of suburban location?
Correct Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be available , Plant expansion is easier due to less or no restriction for building and construction
Your Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be available , Plant expansion is easier due to less or no restriction for building and construction

True/False
Question
In case of X bar-R charts,it is ensured that the assignable causes are detected before the tolerances are violated, upper and lower statistical limits are worked out and inserted into a chart.
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer
Question
Which of the following is the criteria for the percentage defectives in the zone of the indecision?
Correct Answer
Lots having the percentage defective more than AQL but less than LPTD
Your Answer
Lots having the percentage defective less than AQL but more than LPTD

Select The Blank
Question
The easiest way to bring the delayed job within the promised delivery time by using extra shift or weekly holiday is ________.
Correct Answer
Overtime working
Your Answer
Overtime working

Multiple Choice Single Answer
Question
What do you mean by lowest possible direct cost required to complete an activity within it's crashed time?
Correct Answer
Crash cost
Your Answer
Crash cost

Multiple Choice Single Answer
Question
In case of Batch Production which kind of labour is expected?
Correct Answer
Skilled in one specific Manufacturing Process
Your Answer
Semiskilled

Multiple Choice Multiple Answer
Question
Which three of the following are causes of continuous upward pattern of Xbar-R control chart?
Correct Answer
Wear of tool , Abnormal rise in temperature , Accumulation of dirt
Your Answer
Wear of tool , Abnormal rise in temperature , Accumulation of dirt

True/False
Question
Root cause of most of the breakdowns is failure of the lubrication system.
Correct Answer
True
Your Answer
True

True/False
Question
It is not necessary to know spare time available on the non-critical path to allow a little delay for noncritical activity.
Correct Answer
False
Your Answer
False

True/False
Question
MRP software generates time periodwise requiremetn of subassemblies
Correct Answer
True
Your Answer
True

True/False
Question
In case of two handed process chart, the simultaneous activities of both hands are recorded opposite to each other on the chart.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer
Question
What do you mean by CPM?
Correct Answer
Critical Path Method
Your Answer
Critical Path Method

Multiple Choice Multiple Answer
Question
Which of the following are major inputs to scheduling?
Correct Answer
Overlapping of operations , Effective Capacity per work centre , Performance standards
Your Answer
Overlapping of operations , Effective Capacity per work centre , Performance standards

Multiple Choice Multiple Answer
Question
Lack of material planning results in the following
Correct Answer
Over ordering , under ordering , stockouts
Your Answer
Over ordering , under ordering , stockouts

Multiple Choice Single Answer
Question
What do you mean by the verification of object against predetermined standards of quality or quantity or both?
Correct Answer
Inspection
Your Answer
Inspection

Multiple Choice Multiple Answer
Question
What are the advantages of templates over diagrams?
Correct Answer
Can be conveniently moved on the graph paper , Less laborious , Saves time
Your Answer
Can be conveniently moved on the graph paper , Less laborious , Unskilled person can do and analyze it

True/False
Question
It would not affect the project completion time if non-critical activities take little loner time than planned.
Correct Answer
True
Your Answer
True

Select The Blank
Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Single Answer
Question
Any premise in which persons are employed for purpose of making any product/s is called
Correct Answer
Factory
Your Answer
Factory

Select The Blank
Question
An Ideal OC curve is ________ shaped curve that accpets all the lots with quality equal to or better than AQL .
Correct Answer
Rectangular
Your Answer
Bell

Multiple Choice Single Answer
Question
Which is the right time to prepare stores issue order?
Correct Answer
When route sheet is ready
Your Answer
When route sheet is ready

Multiple Choice Single Answer
Question
Which element of a network represents a task which has got a definite beginning and definite end?
Correct Answer
Activity
Your Answer
Activity

Multiple Choice Single Answer
Question
Which kind of preventive inspection detects some defects in moving parts, internal cracks, and others , when machine is under preplanned shutdown?
Correct Answer
Internal inspection
Your Answer
Internal inspection

Select The Blank
Question
Production Planning is a centralised activity which includes functions such as ________
Correct Answer
Scheduling
Your Answer
Dispatching

Select The Blank
Question
The ________ is the watch dog which ensures that every element of production and activities which could affect the quality of end product are regulated to the extent desirable.
Correct Answer
Quality control
Your Answer
Quality control

Select The Blank
Question
Goods after final inspection should accompany ________to enable dispatch department to identify and draw correct reference.
Correct Answer
Forwarding note
Your Answer
Forwarding note

Multiple Choice Single Answer
Question
Who has introduced the useful concept of control chart in 1931?
Correct Answer
Walter Shewhart
Your Answer
Walter Shewhart

1 comment:

  1. Your article continually have alot of really up to date info. Where do you come up with this? Just stating you are very inspiring. Thanks again production control conformance

    ReplyDelete